CP3 pallet 1140 x 1140 x 165 open deck 3 runners heavy

The square 1140 x 1140 mm format matches the CP3 and CP9 formats of the chemical industry. As a result, it is a common choice wherever goods move on CP-sized pallets in the process industry. What is more, a plastic pallet needs no heat treatment or stamp under the ISPM 15 standard for wood packaging. That makes this CP3 pallet 1140x1140 a practical choice for the chemical industry.

The static load of 7,500 kg applies when the pallet rests on a flat, level floor, for example in block stacking. In contrast, the dynamic load of 2,000 kg applies when a forklift or pallet truck lifts and moves the loaded pallet. Finally, the racking load of 1,250 kg applies when only the rack beams support the pallet.

All values assume an evenly distributed load. For the racking load, Q-Pall uses a test protocol with 25 kg bags. Point loads or uneven loading reduce the usable capacity, so always check the pallet against your actual load.

The open deck lets moisture drain away and allows air to circulate around the load. Three runners give the pallet a stable base on the floor and on rack beams. Its weight of 21.9 kg reflects a robust construction for repeated use. Like all Q-Pall pallets, it consists of recycled plastic, does not absorb moisture and has no nails or splinters.

Would you prefer a different configuration? Then consider the CP9 version with an open deck and six runners, which weighs 24.6 kg and carries 7,500 kg static, 2,200 kg dynamic and 1,250 kg in racking. Alternatively, the medium version with an open deck and three runners weighs 13.6 kg and carries 7,500 kg static, 1,375 kg dynamic and 300 kg in racking. In addition, the CP9 version with an open deck and six runners weighs 14.3 kg and carries 5,000 kg static, 1,500 kg dynamic and 300 kg in racking.