Plastic pallet 1300 x 1100 x 160 open deck 5 runners heavy

The 1300 x 1100 mm format matches the CP7 format of the chemical industry and, turned a quarter, the CP4 format of 1100 x 1300 mm. Its large surface suits voluminous goods. What is more, a plastic pallet needs no heat treatment or stamp under the ISPM 15 standard for wood packaging. That makes this 1300x1100 heavy pallet with 5 runners a practical choice for both internal logistics and export.

The static load of 7,500 kg applies when the pallet rests on a flat, level floor, for example in block stacking. In contrast, the dynamic load of 1,500 kg applies when a forklift or pallet truck lifts and moves the loaded pallet. Finally, the racking load of 1,375 kg applies when only the rack beams support the pallet.

All values assume an evenly distributed load. For the racking load, Q-Pall uses a test protocol with 25 kg bags. Point loads or uneven loading reduce the usable capacity, so always check the pallet against your actual load.

The open deck lets moisture drain away and allows air to circulate around the load. Five runners support the pallet over a larger area than three runners. Its weight of 21.5 kg reflects a robust construction for repeated use. The pallet consists of a mix of HDPE and PP, does not absorb moisture and has no nails or splinters.

Would you prefer a different configuration? Then consider the heavy version with an open deck and three runners, which weighs 21.3 kg and carries 7,500 kg static, 1,500 kg dynamic and 1,375 kg in racking. Alternatively, the heavy version with a closed deck and three runners weighs 24.1 kg and carries 7,500 kg static, 1,500 kg dynamic and 1,375 kg in racking. In addition, the heavy version with an open deck and six runners weighs 23.7 kg and carries 7,500 kg static, 1,500 kg dynamic and 1,375 kg in racking.