Plastic pallet 1140 x 1140 x 156 open deck 6 runners medium

The square 1140 x 1140 mm format matches the CP3 and CP9 formats of the chemical industry. As a result, it is a common choice wherever goods move on CP-sized pallets in the process industry. What is more, a plastic pallet needs no heat treatment or stamp under the ISPM 15 standard for wood packaging. That makes this 1140x1140x156 medium pallet with 6 runners a practical choice for both internal logistics and export.

The static load of 7,500 kg applies when the pallet rests on a flat, level floor, for example in block stacking. In contrast, the dynamic load of 1,375 kg applies when a forklift or pallet truck lifts and moves the loaded pallet. Finally, the racking load of 200 kg applies when only the rack beams support the pallet.

All values assume an evenly distributed load. For the racking load, Q-Pall uses a test protocol with 25 kg bags. Point loads or uneven loading reduce the usable capacity, so always check the pallet against your actual load.

The open deck lets moisture drain away and allows air to circulate around the load. Six runners support the pallet over a larger area than three runners. Its weight of 16.9 kg reflects a robust construction for repeated use. The pallet consists of a mix of HDPE and PP, does not absorb moisture and has no nails or splinters.

Would you prefer a different configuration? Then consider the medium version with an open deck and three runners, which weighs 15.4 kg and carries 7,500 kg static, 1,375 kg dynamic and 200 kg in racking. Alternatively, the heavy version with an open deck and six runners weighs 25.1 kg and carries 7,500 kg static, 2,000 kg dynamic and 1,250 kg in racking. In addition, the light version with an open deck and three runners weighs 9.7 kg and carries 2,500 kg static and 1,000 kg dynamic.